Bentone B55 - List of Components LAL 1

37
Bentone B55/B65
General
A1 Oil burner control
A6 Regulator R316T
B1 Photoresistor
F1 Operating fuse
F2 Fuse
F3 Fuse
F4 Fuse 1A
H1 Lamp, low capacity
H2 Lamp, high capacity
H3 Lamp, Stage 3
H5 Alarm signal 230V
K1 Thermal overload protection
M1 Burner motor
M2 Damper motor L&SSQN75.294A21B
P1 Time meter, Stage 1
P2 Time meter, Stage 2
P3 Time meter, Stage 3
S1 Operating switch
S2 Operating switch, high/low capacity
S3 Operation thermostat
S4 Temperature limiter
S5 Micro switch for hinged door
S6 Control thermostat, high/low capacity
S7 Main switch 3-fas
S8 Operating switch, Stage 3
S9 Control thermostat, Stage 3
S20 Main switch 1-fas
T1 Ignition transformer
X1 Connection terminal board
X2 Earth terminal
X3 Plug-in contact ”Euro”, burner
X4 Plug-in contact ”Euro”, boiler
X5 Plug-in contact ”Euro”, high/low burner
X6 Plug-in contact ”Euro” high/low boiler
X7 Plug-in contact ”Euro” 3-phase, burner
X8 Plug-in contact ”Euro” 3-phase, boiler
X9 Plug-in contact regulator, burner
X10 Plug-in contact regulator, PT 100-resistance
thermometer
X23 Plug-in contact ”Euro”, Stage 2 burner
X24 Plug-in contact ”Euro”, Stage 2 boiler
Y1 Solenoid valve 1
Y2 Solenoid valve 2
Y3 Solenoid valve 3
Y1S Safety solenoid valve
(Standard on burners with an output ≥ 100 kg/h)
(Option on burners with an output < 100 kg/h)
7.4.1 List of components LAL 1... (B55-3/B65-3 och B55-3/B65-3)
If S6 is missing connection between L1 and L2.
If S9 is missing connection between T6 and T8.
Mains connection and fuse in accordance with local
regulations
max loading K1
Connection A1,A2 / 95, 96 / 97, 98 Max 0,2A/15W