Bernard Controls AT LOGIC v2 User Manual

English
32
How to set torque limits
1. Enter the menu, then navigate to Settings > Actuator
Commissioning.
2. Select Set torque limits and validate with OK on the left knob.
3. Select closing or opening direction and validate with OK on
the left knob.
The following screen appears.
4. Select the limit to modify with

or  on the right knob then
validate with OK on the left knob.
The following screen appears.

Bernard Controls AT LOGIC v2 Specifications

General

Brand	Bernard Controls
Model	AT LOGIC v2
Category	Ranges
Language	English