Bernard Controls AT LOGIC v2 User Manual

English
48
5.4.6 How to set the button mode
The button mode can be configured in Setting > Button mode.
The following modes are available:
• Pulse mode: turn and release the knob to send a command.
• Maintained mode: turn and hold the knob to send a
command. The command will stop when the knob is
released.
• Proportional mode: turn the knob to define a precise target
percentage of opening.
1. Enter the menu and navigate to Settings > Buttons and
Display.
The following screen appears.
2. Go down in the menu to Button mode and validate with OK
on the left knob.
The following screen appears.

Bernard Controls AT LOGIC v2 Specifications

General

Brand	Bernard Controls
Model	AT LOGIC v2
Category	Ranges
Language	English