Bernard Controls AT LOGIC v2 User Manual

English
51
5.5.3 Setting Priority for remote commands
Priority allows to reverse the direction of travel when an operation
is in progress without having to stop the actuator.
How to set priority for remote command
1. Navigate in the menu to Settings > Remote commands.
The following screen appears.
2. Go down in the menu list, select Priority and validate with
OK on the left knob.
The following screen appears.
3. Select the priority action in the list then validate with OK on
the left knob.
4. Go down to Save and validate with OK on the left knob.
The following screen appears.
5. Select YES and validate.

Bernard Controls AT LOGIC v2 Specifications

General

Brand	Bernard Controls
Model	AT LOGIC v2
Category	Ranges
Language	English