Sewing preparation
17
2020-09 EN 5220205.00A.04
2 Sewing preparation
2.1 Connection and Switching on
Connecting the machine and foot control
> Insert the equipment plug (1) for the power and foot control cable into the power cable connection.
> Insert the power plug (2) for the power and foot control cable into the socket.
Use of the power cable (only USA/Canada)
The machine has a polarized plug (one contact is wider than the other). To reduce the risk of electric shock,
the plug can only be plugged into the socket in one way. If the plug does not fit into the socket, turn the
plug. If it still does not fit, contact an electrician to install an appropriate outlet. Do not modify the plug in
any way.
Switching the machine on
The main switch has two switch-on settings:
• Quick sewing.
• Slow sewing.
> To sew quickly, set the main switch to the symbol.
– The maximum sewing speed is 1100 stitches per minute.
> To sew slowly, set the main switch to the symbol.
– The maximum sewing speed is 650 stitches per minute.
Regulating the speed via the foot control
The sewing speed can be continuously adjusted using the foot control.
> Press the foot control down carefully to start the machine.
> To sew more quickly, press the foot control further down.
To Next Page
Loading...
