Bernette B05 Academy - Sewing Corners; Sewing very Slippery Fabrics

Creative sewing
41
2020-09 EN 5220205.00A.04
> To support the presser foot when manually guiding the fabric and sewing from the folded side, place
one, two or three small plates from the height compensating tool (1) behind the needle under the
presser foot.
1
1 Height compensating tool
3.6 Sewing Corners
> Stop the machine when the corner is reached.
> Pierce the needle into the fabric.
> Raise the presser foot.
> Use the needle as a pivot and turn the fabric.
> Lower the presser foot and continue sewing.
3.7 Sewing very slippery fabrics
Very slippery materials such as leather, imitation leather, plastic or vinyl can easily be sewn using the zigzag
foot with sliding sole.
> Fit the zigzag foot with sliding sole.
> Select the required stitch pattern.
> Select the required stitch length.
> Select the required stitch width.
> Set the required needle position.
> Sew at a slow, even speed.