Practical stitches
49
2020-09 EN 5220205.00A.04
> To attach the elastic tape, pull it apart along the length of the gathered fabric.
4.9 Manual darning
Used for darning holes or worn areas in all fabric types.
> Remove the presser foot holder and fit the darning/embroidery foot on the presser foot bar.
– The lever (1) must rest on the top of the needle clamping screw (2).
> Press the darning/embroidery foot from underneath with your finger and tighten the screw (3).
> Turn the stitch pattern selector knob to «A».
> Set the stitch length to «0».
> Lower the feed dog.
> Attach the extension table.
> Lower the feed dog.
To Next Page
Loading...
