Bernette B05 Academy - Fitting Finger Guard

Sewing preparation
25
2020-09 EN 5220205.00A.04
> To reduce the presser foot pressure, turn the «Presser foot pressure» adjustment knob anti-clockwise.
Fitting finger guard
The finger guard reduces the risk of the user's fingers moving too close to the needle during sewing,
resulting in injury.
> Raise the presser foot.
> Remove the presser foot.
> Loosen the screw on the presser foot holder and remove the presser foot holder.
> Attach the finger guard to the screw.
> Hold the presser foot holder by the presser foot bar and screw it in using the screw.