Sewing preparation
32
2020-09 EN 5220205.00A.04
> Guide the thread through the thread guide.
> Guide the thread around the bobbin winder pre-tension in the direction of the arrow.
> Pull the end of the thread through one of the inner holes on the bobbin and place the empty bobbin on
the bobbin winding unit.
> Push the bobbin to the right-hand position.
– The machine switches to bobbin winding mode. Sewing is not possible.
> Hold the end of the thread tightly with one hand.
> To start the winding process for a few rotations and then stop it again, press the foot control briefly so
that the thread is firmly attached to the bobbin.
To Next Page
Loading...
