Bernina 475 QE - Attaching the Knee Lifter of the Free Hand System; Attaching the Touchscreen Pen (Optional Accessory); Switching the Machine on

Sewing preparation
30
> Insert the device connector of the power cable into the machine's power cable connection.
> Insert the power plug of the power cable into the socket.
Attaching the knee lifter of the Free Hand System
The lateral position of the knee lifter can be adjusted by your local BERNINA Dealer if required.
> Insert the knee lifter into the opening at the front side of the machine.
> Adjust the sitting height so that the knee lifter can be operated with the knee.
Attaching the touchscreen pen (optional accessory)
> Store the touchscreen pen at the magnet holder.
Switching the machine on
> Set the Power Switch to «I».