EasyManua.ls Logo

Bernina 475 QE - Wide Edgestitching; Edgestitching Using the Seam Guide (Optional Accessory)

Bernina 475 QE
126 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Practical stitches
77
> Select the left-hand needle position at the desired distance to the edge.
5/8
5/85/8
1
25
15 15
15
75
75
6.14 Wide edgestitching
> Fit the Reverse Pattern Foot#1.
> Tap «Practical Stitches».
> Select Straight stitchNo.1.
> Guide the edge along the presser foot or at a distance of 1–2.5cm along the marks on the stitch plate.
> Select the needle position at the desired distance to the edge.
6.15 Edgestitching using the seam guide (optional accessory)
When sewing parallel wider lines, it is recommended to guide the seam guide (optional accessory) along a
sewn line.
> Fit the Reverse Pattern Foot#1.
> Tap «Practical Stitches».
> Select Straight stitchNo.1.
> Loosen the screw on the back of the presser foot.
> Insert the seam guide into the hole in the presser foot.
> Adjust the width as required.
> Tighten the screw.

Table of Contents