Bernina 475 QE - Sewing a Buttonhole Automatically with the Buttonhole Foot with Slide #3 A

Buttonholes
96
> Sew the required length of the buttonhole.
– Step2 is activated.
> Stop when the required length of the bead or the length marking is reached.
> Step3 appears by tapping «Scroll down».
> The machine sews the curve or the eye and stops automatically.
> Step4 appears by tapping «Scroll down».
– The machine sews the second bead in reverse.
> Stop the machine at the level of the first stitch where the buttonhole begins.
> Step5 appears by tapping «Scroll down».
– The machine sews the upper bartack and secures automatically.
9.11 Sewing a buttonhole automatically with the Buttonhole Foot with
Slide#3A