Bernina 475 QE - Using Cord with the Buttonhole Foot with Slide #3 A

Buttonholes
92
> Pull the ends of the cord to the wrong side using the hand sewing needle and either knot or secure them
there.
Using cord with the Buttonhole Foot with Slide#3A
The additional cord reinforces and embellishes the buttonhole and is particularly suitable for the Standard
buttonholeNo.51. Ideal cords are Perle cotton No.8, strong hand-sewing thread and fine crochet yarn. It is
recommended to not hold the cord while sewing.
Prerequisite:
• The Buttonhole Foot with Slide#3A is fitted and raised.
> Insert the needle at the beginning of the buttonhole.
> Guide the cord on the right side under the Buttonhole Foot with Slide.
> Hook the cord over the pin at the back of the Buttonhole Foot with Slide.
> Pull the cord to the front on the left side under the Buttonhole Foot with Slide.
> Pull the cord ends into the slits.