Sewing preparation
35
> Lower the shaft via the lever.
– The presser foot sole snaps in.
Changing the presser foot
> Raise the needle.
> Raise the presser foot.
> Switch the machine off and disconnect it from the power supply system.
> Push the clamping lever up (1).
> Remove the presser foot (2).
> Guide the new presser foot upwards over the cone.
> Press the clamping lever down.
Having the presser foot displayed in the User Interface
For each selected stitch, the machine displays the recommended and any other alternative presser feet.
Prerequisite:
• The machine is switched on.
> Select a stitch pattern.
– In the icon «Presser foot indicator / presser foot selection» the recommended presser foot is indicated
with a number.
> Tap «Presser foot indicator / presser foot selection».
> Wipe up in the area of the presser feet to have more preser feet displayed.
To Next Page
