Bernina 475 QE - Deleting Stitch Patterns from the Personal Memory; Securing; Securing a Seam with the Button Securing; Height Compensation of Uneven Layers

Creative sewing
64
> Tap «Load embroidery motif».
> Select the file where the stitch pattern has been saved.
> Select a stitch pattern.
Deleting stitch patterns from the personal memory
Prerequisite:
• The stitch pattern is saved in the personal memory.
> Tap «Personal Memory».
> Tap «Delete».
> Select the file where the stitch pattern has been saved.
> Select a stitch pattern.
> To delete the stitch pattern, tap «Confirm».
5.7 Securing
Securing a seam with the button «Securing»
The «Securing» button can be programmed with various securing stitches. (see page48)
> Pressing the «Securing» button before starting to sew.
– The stitch pattern/stitch pattern combination is secured with the number of programmed stitches
when sewing is started.
> Press the «Securing» button while sewing.
– The machine stops immediately and secures with the number of programmed stitches.
5.8 Height Compensation of uneven layers
If the presser foot is at an angle when sewing over a thick seam, the feed dog cannot grip the fabric and the
sewing project cannot be sewn out properly.
> Place 1 – 3 compensating plates as required from the back of the presser foot close to the needle to level
the fabric layer.
– The presser foot is leveled with the sewing project.