Bernina 700D - MULTI-PURPOSE FOOT Corded Piping

MASTERING YOUR BERNINA
®
1/04/02 700D/800DL/69
BERNINA
®
700D/800DL
MASTERING
YOUR
BERNINA
®
Fabric: Medium weight cotton bias strip, 2” x 8”
12” of
3
/8” cotton cording
Needle: 80/12 Stretch
Thread: 4 cones of serger thread
Presser Foot: Multi-Purpose Foot with Guide (optional accessory)
Attachment Base (optional)
MULTI-PURPOSE FOOT
Corded Piping
• Owner’s manual pg.___
• Following the instructions in the Owner’s manual thread the serger for a 4-thread overlock stitch using
both needles.
• Set all thread tension levers to normal (3-5).
• Set stitch length to 3.5mm.
• Attach the Attachment Base.
• Attach the Multi-Purpose Foot and Guide following the directions in the instruction manual for the
Multi-Purpose Foot with Guide.
• Insert the cord into the guide.
• Wrap the bias strip around the cord and place the wrapped cord in the groove under the foot.
• Serge the covered cord.
• Mount the sample.