BestCode NExT 82 - Cleaning the Viscometer

BestCode Next Series 8 Technical Manual October 2022 Page 108 of 290
9. Cap the removed viscometer so
it does not dry
10. Test the Viscometer for
accurate reading.
Cleaning the Viscometer
Be familiar with proper safety information for handling fluids.
Procedure Time: 20 minutes
1. Remove the Viscometer
2. Remove the Valve from the Viscometer
3. Remove the drain screw from the
Viscometer.
4. Use Cleaner to clean out the
Viscometer.
5. Ensure viscometer restrictor is free of
debris.
Plug
together
Plug with
cap