BestCode NExT 82 - Page 137

BestCode Next Series 8 Technical Manual October 2022 Page 123 of 290
5. Remove the LCD Display Assembly.
6. Immediately place the display into an
anti-static plastic bag and place into a
static-safe carton.
Static safe cartons are included with
each spare LCD Display Assembly. Do
not discard them!
7. Align the new LCD Assembly on the
mounting threads.
8. Place the washer over the LCD Display
Bracket, and then thread on the M5
Locknut.
Leave the nut slightly loose for
adjustment of the LCD Display assembly.