BestCode Next Series 8 Technical Manual October 2022 Page 223 of 290
Single Image Loss Recovery Load
1. The BestCode has two copies of the
Firmware image loaded onto the
printer to provide a live backup. If
one of the images is corrupted or
lost, the prompt to the right will
appear.
Insert a USB with the Version of Firmware indicated on the Prompt and press OK to recover.
Double Image Loss Recovery Load
1. The BestCode has two copies of the
Firmware image loaded onto the printer
to provide a live backup. If both of the
images are simultaneously corrupted or
lost, the system will boot into a
recovery image.
To Next Page
Loading...
