BestCode NExT 82 - Software Tools

BestCode Next Series 8 Technical Manual October 2022 Page 241 of 290
Installing Graphics
After Graphics files are created, the “Restore” feature is used inside the Series 8 system to allow use of the Graphic in
messages.
1. Install the USB with the Graphic.
2. Navigate to Tools.
Home>Service>Tools
3. Press Restore.
4. After completing the Restore process, the
graphic is available for printing.
Note:
Graphics will persist after Firmware
Upgrade.
Using Graphics in Messages
Graphics are available to be added to messages
from the Message editor immediately after
performing the Restore Function