UNITE – Unite RP / RP-T bodypack receiver
22
.. Switching on or o
• To switch on the bodypack receiver, briefly press the
on-o and menu button .
• In order to switch o the bodypack receiver, press the
button for approx. 5 seconds.
• When the device is switched on, the atus indicator
displays the operating atus information. See also
the following “Status indicator light during opera-
tion” table.
• When the Unite RP bodypack receiver is switched on,
the adjacent main screen will be displayed indicating
that the transmitter is ready for operation.
• The individual symbols mean:
Display of all active speakers (Master, 1
st
slave,
2
nd
slave)
Highlighted display of current type of speaker
(Master, 1
st
slave or 2
nd
slave)
Current channel name
RP-T only:
Headset connected
Talkback function activated
Display of remaining battery capacity
Status indicator light during operation:
Indicator light Operating status
Off Device is switched off
Flashing yellow
slowly
• Ready to operate and
battery status > 10 %
• Out of range from
transmitter
Yellow Only for RP-T:
Connection established and
battery status > 10 %
Green • RP:
Connection established
and battery status > 10 %
• RP-T:
Connection established,
talkback is running and
battery status > 10 %
Flashing red slowly Low battery level < 10 %
Red • Device is starting
• Firmware update is
running
Flashing red rapidly Critical error
Switching receiver on or o
Standard display
Table 5
To Next Page
Loading...
