Chapter1. Introduction 6
Rear Panel
① On/Off Switch : Powers on/off.
② RS-232 : RS-232 data port is provided.
③
Ethernet : Connect to an Ethernet router or switch for network / internet acces
s.
④
USB :
Connects the USB memory stick or external HDD.
⑤ HDMI : Connects to TV using a HDMI cable for both audio and video signals.
⑥ e-SATA : Connects the external HDD using e-SATA cable.
⑦ TV SCART : A SCART connector is provided for TV using a SCART cable.
⑧ VCR SCART : A SCART connector is provided for VCR using a SCART cable.
⑨ S/PDIF : Connects to a digital audio system using S/PDIF cable.
⑩ Video output : Connects to TV using RCA cable.
⑪ Audio output : Connects to TV using RCA cable.
⑫ Component (YPbPr) : Connects to TV using a component cable.
⑬
TUNER A : An antenna cable must be connected to receive TV signal.
⑭ TUNER B : An antenna cable must be connected to receive TV signal.
⑮
TUNER C : An antenna cable must be connected to receive TV signal.
To Next Page
Loading...
