48 - Espas 20I
D812913 10598_02
16 - ROUTINE MAINTENANCE
The Espas 20 parking system has been designed and built to work for many years provided the
few required maintenance operations are carried out carefully and promptly.
Cleaning the inside
For the station to work correctly, keep parts such as the scanner glass, deneb board and fan
lter as clean as possible. Clean with oil-free compressed air; all these parts are of vital im-
portance for the correct operation of the station; follow the instructions carefully and clean
weekly.
Cleaning the exterior
Clean the station only with water and a small amount of mild detergent. Do not clean the
mechanical parts of the station with high pressure equipment.
ATTENTION! Clean the station only after disconnecting the electrical supply
Clean the outside glass
of the scanner (if any)
Dismantle and clean the fan
lter with oil-free compressed
air
Clean the Deneb board with
oil-free compressed air
To Next Page
Loading...