BA-EN-HydroStar V3.1 page 11
4 Turbine without HydroStar installation shaft
• The turbine is designed for use under water.
• It is to be installed under the surface of the water at a suitable location in the swimming pool (Center
turbine 300mm under water level).
• Protective equipment may be necessary to ensure that swimmers do not come into contact with the
turbine.
• It must be ensured that an adequate water quantity is fed in.
• The motor cable must be installed so that it is not drawn in by the water current.
4.1 Installation example for a BGA turbine
NOTE
The illustration is only given as an example. The machine builder is responsible for the planning and
professional installation as well as installation of any required protective equipment!
4.2 Dimensions of turbine BGA 160/320 with installation flange
NOTE The turbine may only be fastened to the installation flange!
To Next Page
Loading...