EasyManua.ls Logo

Binder HydroStar BGA 430 - General Information; Important Information

Default Icon
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BA-EN-HydroStar V3.1 page 4
2.1.3 Hazard information
The following directions are for the safety of the service personnel as well as for the safety of the
described products as well as any connected devices.
Danger! Rotating/rotating components.
Failure to observe this can result in death, serious injury or property damage.
Please note that there are no persons in the inflow and outflow area of the turbine swimming
system before the start!
Please note that no objects (such as toys), body parts or body-worn accessories are placed in
the openings (suction openings and discharge openings)!
Never before starting the turbine swimming system, nor during the operation of the turbine
swimming system!
Danger! Dangerous electrical voltage.
Failure to observe this can result in death, serious injury or property damage.
Isolate supply voltage before installation or removal work as well as in case of fuse
replacement or modifications of the setup.
Observe the accident prevention and safety regulations that apply to the specific area of use.
Before putting the machine into operation, check whether the rated voltage coincides with the
local mains voltage.
Emergency stop devices must remain operational in all modes of operation. Disabling the
emergency stop devices may not cause an uncontrolled restart.
The electrical connections must be covered!
Ground wire connections must be checked for fault-free function after installation!
The conditions described in DIN VDE 0100-702:2003-11 must be observed.
2.1.4 Validity
This document applies to the HydroStar counterflow units from the BGA product line.
Safety information
Adherence to this information is the prerequisite for trouble-free operation and the fulfilment of any
guarantee claims.

Related product manuals