Binder KB 23 - Page 50

KB 23 / KB 23-UL (E3.1) 02/2019 page 50/87
Press key
Display 1 shows
0000
Display 2 shows Ch1 = SP2: Off
(entry of state of channel 1)
(actual setting: OFF)
Enter the state of channel 1
Off using arrow keys
Setting is shown in display 2.
Press key
Display 1 shows
0000
Display 2 shows Channel 2: Off
(entry of state of channel 2)
(actual setting: Off)
Press key EXIT
Display 1 shows
20.00
(time of the selected shift point)
Display 2 shows S1: 20:00 - -
(actual selection of the shift point: S1)
(actual setting: time 20.00, channels OFF)
Press several times key EXIT
or wait for 120 seconds
Controller returns to normal display.