To Next PageTo Next PageWhat to do if the Binder Laboratory Equipment chamber doesn’t heat up and the safety controller responds?
If the Binder Laboratory Equipment chamber is not heating up when turned on and the safety controller is responding, first acknowledge the alarm on the controller. Then, check the temperature setpoint setting. If necessary, select a suitable safety controller setpoint.
How to fix impaired valve function of hose burst protection in Binder Laboratory Equipment?
To resolve impaired valve function of hose burst protection in your Binder Laboratory Equipment, remove calcifications by using citric acid or acetic acid solutions. Have a plumber inspect the valve.
What to do if the Binder Laboratory Equipment controller does not equilibrate to setpoints in Fixed value operation mode?
If the controller does not equilibrate to setpoints entered in Fixed value operation mode in your Binder Laboratory Equipment, change to Fixed value operation mode.
General| Brand | Binder |
|---|---|
| Model | KBF 240 |
| Category | Climate chamber |
| Language | English |
Requirements for technicians performing maintenance and repairs.
Identification of potential hazards (electric shock, mechanical, etc.).
Overview of tasks to be performed during annual service.
Electrical safety testing procedures after repair or modification.
Common electrical problems and their solutions.
Troubleshooting steps for heating system malfunctions.
Troubleshooting steps for cooling system malfunctions.
Diagnosis and correction of humidification module faults.
Guidance on inspecting and replacing parts within the outer door.
