Instruction Manual TProfessional Basic 06/2011 67
11.2 Packing of the Thermocycler
Biometra uses an extra designed packaging system where the instrument is mounted in
between two tearproof foils. The Thermocycler is put onto the lower inlet and is fixed in between
the foils by pressing the upper inlet down.
Note: The Thermocycler is only protected from transport damage if the packing instructions are
followed and the instrument is mounted in between the foils. Biometra will not be responsible for
transport damage by improper packing.
Gerät zwischen den
Folien schwebend
einspannen!
Mount instrument
floating in between
the foils!
To Next Page
Loading...
