Rev. 1.4 2. PATIENT/DATA MANAGEMENT
2.1 ADMIT
Additional setups are made for each parameter function. One can make an overall setup for the
entire monitor system.
CHANGE ADMIT INFO : The CHANGE ADMIT INFO option allows you to change or enter
information pertinent to the monitored patient.
ADMIT: Depending on how your monitor is set up, you will see either ADMIT patient or new case
DISCHARGE: This menu option indicates that patient is admitted. You select it to discharge the
patient.
HEIGHT UNIT : these options change the units of measure for height
WEIGHT UNIT : these options change the units of measure for height
DEFAULTS SETTING : Configure alarms, set alarm limits, and establish display defaults
to be recalled whenever a discharge is performed.
DEFAULT
SETTING
WEIGHT
UNIT:
KG
HEIGHT
UNIT:
CM
ADMIT
TYPE:
ADT
CHANGE
ADMIT
INFO
DISCHARGE
PREV
MENU
MAIN
MENU
ADMIT TYPE
DISCHARGE menu select YES and unregistered state after switching to the use of equipment to set
up the environment.
ADU : ADULT // PED: PEDIATRIC // NEO : NEONATE
DEFAULT
SETTING
WEIGHT
UNIT:
KG
HEIGHT
UNIT:
CM
ADMIT
TYPE:
ADT
CHANGE
ADMIT
INFO
ADMIT
PREV
MENU
MAIN
MENU
> ADT
PED
NEO
DEFAULT
SETTING
ADMIT
TYPE:
ADT
ADMIT
PREV
MENU
MAIN
MENU
To Next Page
Loading...
