Bionet BM1 - Alarm ICON

Rev. 1.4 2. PATIENT/DATA MANAGEMENT
52
BM1 User’s Manual
ALARM LIMITS：The machine enables one to see and change the limits of alarm for all parameter
functions.
ALARM VOLUME：volume of each alarm can be adjusted in 10 step.
ALARM LEVEL：Priority of each parameter alarm can be set up.
ALARM REVIEW： Shows the priority order information for all alarms of each measurement.
NURSE CALL： Set the ON/OFF feature of the NURSE CALL.
ALARM
REVIEW
ALARM
LEVEL
NURSE
CALL:
ON
ALL
LIMITS
ALARM
VOLUME:
OFF
PREV
MENU
MAIN
MENU
Alarm ICON
s
(SILENCED) : To silence an alarm tone when it sounds, Touch the Alarm key on the
front of the monitor. The current alarm will be silenced for 60 seconds and the icon is displayed on
the screen.
5
(Alarm pause 5Min.): To start an alarm pause, Touch alarm key on the front of the
monitor. Touch the key twice if an alarm is sounding when you want to start an alarm pause.
( All alarm off.): To start an alarm pause, Touch alarm key on the front of the monitor.
Touch the key three times if an alarm is sounding when you want to start all alarm pause.
( Alarm VOL. OFF) : You can permanently turn the alarm volume off. The icon is
displayed on the screen.