Biral PrimAX RED Series User Manual

76 | english
Table of contents
1 Safety notes ......................................77
1.1 General remarks ..................................77
1.2 Identification of notices ........................77
1.3 Staff qualification and training .............. 77
1.4 Risks in the event of non-compliance
with the safety information ...................77
1.5 Safety-conscious work ........................77
1.6 Safety notes for the operator ...............77
1.7 Safety information for installation,
maintenance and inspection works .....78
1.8 Unauthorised reconstruction and
production of spares ............................78
1.9 Improper operating methods ...............78
2 Symbols used....................................78
3 General information .........................79
3.1 Intended use ........................................ 79
3.2 Requirements of the pumped medium 79
3.3 Operating conditions ...........................80
3.4 Protection from the effects of frost.......81
4 Installation.........................................81
4.1 General notes ......................................81
4.2 Flushing heating equipment
(for extended pump).............................81
4.3 Installation ............................................ 81
4.4 Non-return valve ..................................81
4.5 Flow direction ......................................81
4.6 Permissible installation positions .........82
4.7 Permissible medium temperature ........83
4.8 Install pump in the equipment .............. 83
4.9 Alter installation position ......................84
4.10 Heat insulation .....................................85
5 Electrical connection .......................85
5.1 Supply voltage .....................................86
5.2 Connection of the power supply ..........86
5.3 Connect Biral Connector ....................87
5.4 Connect angled connector ..................88
5.5 Connection drawing Clamp
description ...........................................88
6 Start-up ..............................................89
6.1 General ................................................89
6.2 Operational control ..............................89
7 Settings ..............................................89
7.1 Control panel .......................................89
7.2 Types of control ...................................90
7.3 Delivery height (A2, LED 1) ...................90
7.4 Display of the current delivery height
(LED 2) .................................................90
7.5 Summary of maximum delivery height
and delivery amount ............................90
7.6 Activating / deactivating the control
keys .....................................................91
7.7 START / STOP pump ...........................91
7.8 Status display (LED 3) and watt
display (LED 4) ....................................91
7.9 On-site adjustment of the pump ..........91
8 Characteristic curves ......................92
8.1 PrimAX xx-3 characteristic curves .......92
8.2 PrimAX xx-4 characteristic curves .......93
8.3 PrimAX xx-6 characteristic curves ...... 94
8.4 PrimAX xx-8 characteristic curves .......95
9 Fault summary and checklist .........96
10 Technical data...................................97
11 Recycling ...........................................98
12 Spare parts list .................................98

Biral PrimAX RED Series Specifications

General

Brand	Biral
Model	PrimAX RED Series
Category	Water Pump
Language	English