birddog NDI - Page 38

35
Available parameters are:
IP ADDRESS: Target device IP address.
PORT: Target device listening port.
CALL: Called method (command). Please visit https://bird-dog.tv/developer for more information on
available commands.
CTYPE: Data Interchange Standard.
FILE: The parameter and value string.
Example 1
In the image above, the F2 key is congured to deactivate the digital image stabiliser function for
the camera identied by address ‘x.x.x.x’. The OFF value “cstbo” is set for the camera stabilizer
parameter “pic2_camstabilizer”.
Target device and command: http://x.x.x.x:8080/birddogpic2setup
Parameter and value: {“pic2_camstabilizer”: “cstbo”}
Example 2
In the example below, the F3 key is congured to instruct a BirdDog device, identied by address
‘x.x.x.x’, to connect to a specic NDI® source ”birddog (stream1)”.
Target device and command: http://x.x.x.x:8080/connectTo
Parameter and value: {“sourceName”:”birddog (stream1)”}