BK Precision 8500 Series User Manual

27
NOTE
Remove the carrying handle and the two plastic ears before rack-mounting the instrument. To
remove the handle, grasp the handle by sides and pull outwards and rotate it to a special
position to let the arrow on the handle oppose the another arrow on the plastic ears, then pull
the handle outward. After removing the handle, you can use a screwdriver to remove the two
plastic ears.

BK Precision 8500 Series Specifications

General

Series	8500
Voltage Range	0-120V
Display	LCD
Interface	USB, RS232, GPIB (optional)
Modes	CC, CV, CR
Category	Electronic Load