BK Precision 8500 Series User Manual

9
Menu Operation
Press Menu to indicate operation mode .View the menu in VFD and using ? and
? to scroll through the completely menu list as following .IF press
ENTER
key,
you could get the selected menu function. Press
ESC
back to the previous menu
selection page.
MENU
CONFIG
INITIAL CONFIG
Return to the factory default setup value.
POWER-ON RECALL
Setting Power-on state of Load.
ON
When users turn on the electronic load; the
electronic load setup value will
keep the state of last
time when users turn off the electronic load.
OFF<DEFAULT>
Disable this function.
INPUT RECALL
Setup of the electronic load input state in Power on.
ON
When users turn on the electronic load; the
electronic load input will keep the state of last time
when users turn off the electronic load.
OFF<DEFAULT>
When users turn on the electronic load, the
electronic load input will keep the state off.
KEY SOUND SET
Keypad sound setting.
ON<DEFAULT>
Enable key sound.
OFF
Disable key sound.
KNOB LOCK SET
Setup Rotary knob lock state.
ON
Lock Rotary knob.
OFF<DEFAULT>
Unlock Rotary knob.
REMOTE SENSE
Setup voltage measurement Mode.
ON
The electronic load will measure input voltage
from
the remote sense connector.
OFF<DEFAULT>
The electronic load will measure input voltage
from
the front panel connector.
TRIGGER SOURCE
Choosing the trigger signals source.
IMMEDIATE<DEF>
Trigger signals from
Shift
+
Trigger
key
EXTERNAL
Trigger signals from the TRIG connector in the
rear panel.
BUS
Communication command trigger mode.
BAUDRATE SET
Setting baud rate.
9600<DEFAULT>

BK Precision 8500 Series Specifications

General

Series	8500
Voltage Range	0-120V
Display	LCD
Interface	USB, RS232, GPIB (optional)
Modes	CC, CV, CR
Category	Electronic Load