30
4.
??keys .
LOAD MODEL:IT85XX
SN: XXX-XXX-XXX
VER x.xx
Display the
information of the
product Type, series
number version of
software.
5. Press
ESC
button
0.000V 0.000A
Display the actual
input voltage and
current value.
6.Press ??
0.000W I: 0.000A
Display the actual
power value and
setting value.
In Case Of Trouble
Electronic load failure to run during power-on operation. The test of following in
this section help you to solve the possible problem When you turn on the
power of electronic load .
1) Make sure if you have connected the power cord to the unit and plug it in.
Power switch have been pressed.
2) Check the power voltage setting.
Work voltage of load have two type 110V or 220V , Please make sure it is right
voltage accordance to the voltage in your area. You could change the voltage setting
through dial the switch in the rear panel.
3) Check the fuse of load.
If fuse is blowout, please change it as following specification.
Model Fuse specification
(110VAC)
Fuse specification
(220VAC)
8500 T0.5A 250V T0.3A 250V
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
To Next Page
Loading...
Need help?
General
