34
Step2. Press numeric button to enter the current value 4.33.
Step3. Press
ENTER
button to confirm the current value.
Method 2: To set up
I-set
by using Rotary SW
(1) If the key board is unlocked by password, directly adjust the Rotary SW button,
and voltage will be continually changed from the previews value according the rotation.
At the beginning, the cursor will be shown on the last number of the value which is
indicated on the VFD, you can move the cursor to the first number, second number
etc by using number buttons, and then adjust the Rotary SW to change each number,
and let it stay at *.** A. Please see the following description. Then press I-set to
confirm the value.
0.00A 0.00V
0.0W 4.33A
Procedure:
Step1. Press
I-set
button,
Step2. Adjust the Rotary knob to change the value, the operation is as the same as
item (1)
Step5. Press
ENTER
button to confirm the current value.
P-set (set up a constant power from 0 to Max
power)
8500 series electronic load can be set up for a constant power.
Constant power setup procedure is as following:
Procedure Operation details VFD display
Step 1
Press
P-set
POWER =0.000W
Step 2
Enter a new value by using
numeric keys or Rotary
knob to adjust the voltage
value
POWER=*.***W
To Next Page
Loading...
Need help?
General
