37
?
TRIGGER SOURUSE
?
BAUDRATE SET
?
COMM.PARITY SET
?
ADDRESS SET
?
KEY LOCK SET
?
EXIT
?
SYSTEM SET
ENTER
MAX CURRENT SET
?
MAX POWER SET
?
MAX VOLTAGE SET
?
EXIT
?
LIST SET
Enter MODE SET
?
CALL LIST FILE
?
EDIT LIST FILE
?
LIST STORE MODE
?
EXIT
?
LOAD ON TIMER
Enter TIMER STATE
?
TIMER SET
?
EXIT
the ? and
? button to
change the
selecting
function,
press
ENTER
button
to execute
the selection
function or
step into the
next
sub-menu
?
EXIT
Transition Testing Operation
Users could switch between the two different current and voltage in the transition
mode; it could test the transition specialty of power supply. Users could use front
panel or communication interface( TRAN ON AND TRAN OFF) to make it work or not,
Please setting parameters before transition operation. Include Transition setting value,
Constant pulse width setting and Transition Pulse width setting and Transition testing
mode. The mix pulse width is 500uS.The Max pulse width is 6S. Transition Operation
only could work in CC and CV mode.
Users can choose one of the three operation modes: Continuous, Pulse and Toggling
mode.
Transition Parameter Setting
Users could press
Shift
+
S-Tran
to set the transition parameter.
Shift
+
S-Tran
LEVEL A = *****
Setup value A
To Next Page
Loading...
Need help?
General
