16
1.8 7 7. 87 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7.877. 2269
CHAPTER 5: INSTALL ATION
5.1 EMERALD SE RECEIVER (EMD2000SE-R, EMD2002SE-R) CHECKLIST
Before installing your Emerald SE Receiver, refer to the list below to ensure that you have all the items necessary for installation:
Emerald SE Receiver
External power supply for the Emerald SE Receiver
Power cord
Emerald SE Quick Installation Guide (QIG)
5.2 EMERALD SE TRANSMITTER (EMD2000SE-T OR EMD2002SE-T) CHECKLIST
Before installing your Emerald SE Transmitter, refer to the list below to ensure that you have all the items necessary for installation:
Emerald SE Transmitter
External power supply for the Emerald SE Transmitter
Power cord
Emerald SE Quick Installation Guide (QIG)
DVI and USB cables (not included, ordered separately)
5.3 EMERALD SE TRANSMITTER KIT (EMD2000SE-T-K OR EMD2002SE-T-K) CHECKLIST
Before installing your Emerald SE Transmitter, refer to the list below to ensure that you have all the items necessary for installation:
Emerald SE Transmitter
External power supply for the Emerald SE Transmitter
Power cord
DVI cable(s) (One DVI-D cable included for single-head [EMD2000SE-T], two DVI-D cables included for dual-head [EMD2002SE-T])
USB A to USB B Device cable
Emerald SE Quick Installation Guide (QIG)
5.4 INSTALLATION OPTIONS
WARNING: To reduce the risk of electric shock or damage to your equipment, disconnect the power from the Emerald SE device by
unplugging the power supply from the electrical outlet. To reduce the risk of electric shock or damage to your equipment, turn on
the remote workstation and the Emerald SE Transmitter in the order described in the following procedures.
You can install the Emerald SE system either on a point-to-point or networked configuration.
To Next Page
Loading...
Need help?
General