34
1.8 7 7. 87 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7.877. 2269
CHAPTER 8: OSD FUNCTIONS
8.6.2 NETWORK
The network screen shown in Figure 8-13 allows an administrator to change the settings for the Emerald SE Receiver or Manager.
The default network setting for the Receiver is a static IP address of 192.168.1.21. It has a Network Mask of 255.255.255.0 and a
Gateway 192.168.1.1. If DHCP is selected, the Receiver gets its IP address from the DHCP server. Click the Apply button to confirm
any changes to network settings.
NOTE: Only IPv4 addressing supported in current firmware version.
FIGURE 8-13. NETWORK SETTINGS
To Next Page
Loading...
