33
1.8 7 7. 87 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7.877. 2269
CHAPTER 8: OSD FUNCTIONS
Timer Settings
There are 2 timer settings available to users as shown in Figure 8-12. By default, they are turned off. If you wish to turn them on,
you have to select the desired timer, set the time you wish, and click apply. The three timer settings are:
1. OSD Inactivity Timer – This sets a limit on how long a user can be logged on to the OSD without any keyboard or mouse
activity. Once the user reaches the inactivity timer, he/she will be logged out of the OSD. The timer value can be set to a number
from 2 to 60 minutes.
2. Connection Inactivity Timer – This sets a limit on how long a user can be connected to a source (virtual machine, Transmitter etc.)
without any keyboard or mouse activity. Once the session reaches the inactivity timer, he/she will be logged out of their connection
and return to the OSD. The timer value can be set to a number from 2 to 60 minutes.
NOTE: Inactivity occurs when the mouse or keyboard is not pressed or moved for a set period of time.
FIGURE 8-12. TIMER SETTINGS
To Next Page
Loading...
Need help?
General