21
1.8 7 7. 87 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7.877. 2269
CHAPTER 5: INSTALL ATION
1
FIGURE 5-7. FRONT VIEW OF THE EMERALD SE TRANSMITTER, DUAL-HEAD (EMD2002SE-T)
2 3 4 5 6 7 7
9 10
FIGURE 5-8. REAR VIEW OF THE EMERALD SE TRANSMITTER, DUAL-HEAD (EMD2002SE-T)
TABLE 5-2. EMERALD SE TRANSMITTER COMPONENTS
NUMBER IN FIGURES 5-4
THROUGH 5-8
COMPONENT DESCRIPTION
1 Power LED
Disabled;
NOTE: The unit automatically powers on; it must be turned off at the power source.
2
(1) 2.5-mm barrel connector
for power
Links to 5-VDC external in-line power supply
3 (1) USB Type B connector Links to USB input source
4 (1) Link/Activity LED Lights green when there is activity on the link
5 (1) RJ-45 connector Links to 10-/100-/1000-Mbps network
6 (1) 10/100/1000-Mbps LED Lights green when data is being transmtted at 1000 Mbps
7 (1) or (2) DVI input connectors Links to DVI input sources
8 (1) RJ-45 connector* Links to RS-232 serial interface
9 (1) 3.5-mm connector Links to audio
10 (1) 3.5-mm connector Links to audio
*Single-head model only
To Next Page
Loading...
