•Turnspit (fig.6)
Pass
the spit through the joint to be roasted,
thread on the second fork, centre the joint
and
screw the forks tight.
Place
the spit in its
cradle:
the cradle should
be
placed
in the
deep enamel
dish.
Slide the cradle on to shelf support 3, push
gently to
engage
the end of the spit into the
square drive
at the back of the
oven
(fig.7).
FRONT
REAR
fig.6
fig.7
Unscrew
and
remove
the
handle,
so that the
door can
close.
At the end of cooking, screw
the
handle
back on to the spit, so that you
can remove
the joint without
burning
yourself
(fig.
8).
fig.8
N.B.: should you wish
to
roast a large piece
of
meat(up
to
2kg), you can place the dish
on
the
bot-
tom
shelf
support
and insert
the
cradle
in
shelf
support
3,
to
prevent
the
meat
from
touching
the
back of the dish
and
stopping the spit from turning.
To Next Page
Loading...
Need help?
General
