Blanco BOSE6APX User Manual

20
EN
4 USING OF YOUR
•
USING THE TIME SWITCH FUNCTION
In this case, the timing display takes priority
over the time of day display.
- Press the “ ” button (fig.1) until it reads 0.00.
- Set the desired time by pressing + or
-
(fig.2)
buttons until the desired duration is shown
(maximum 60 minutes).
-Wait for a few seconds. The display will start
up, couting down the time in seconds.When
the time has elapsed, a series of warning
beeps will sound.
The beeps can be stopped by pressing any
button, or they will stop automatically after a
few seconds.
fig.1
fig.2
Important
The time switch programming can be altered or cancelled at any time.
•
ADJUSTING THE DISPLAY
BRIGHTNESS
The brightness of the display is adjustable.To
change it:
- Set the programmer time to 0:10 and confirm
( fig.1) .
- Press buttons + and
- at the same time for ten
seconds or so until “CO” is displayed in order
to go back to setting mode.
- Press buttons + or
- to obtain the brightness
you require
(fig.2)
.
Once you have set the brightness to the level
you require, wait a few seconds and reset the
programme selector to the time of day (
fig.3)
.
fig.1
fig.2
fig.3

Blanco BOSE6APX Specifications

General

Brand	Blanco
Model	BOSE6APX
Category	Oven
Language	English