EN 1
/
SAFETY INSTRUCTIONS
—
Do not use
abrasive cleaning
products or hard metal scrapers
for cleaning the oven's glass door, as they could scratch the
surface and cause
the
glass
to shatter.
—
To
clean
both the
electronic programmer window and
the oven
door,
use
a soft cloth.
—
Do not
use cleaning
products,
abrasive creams
or scouring
sponges.
Warning:
Make sure the appliance is disconnected from the power
before replacing the lamp in order to avoid the risk of electric
shock. Change the lamp only when the appliance has cooled
down. To unscrew the view port and the light, use a rubber
glove, which will
make disassembly
easier.
Warning
:
Installation should only be performed by qualified installers
and technicians.
Warning
:
The
electrical plug must
remain
accessible after installation.
It must be possible to disconnect the appliance from the power
supply, either using a plug or by fitting a switch on the fixed
wiring
system
in
accordance
with installation rules.
If the power cable is damaged, it should be replaced by the
manufacturer,
its
after-sales
service
department
or by a similarly
qualified person in order to avoid danger.
To Next Page
Loading...
Need help?
General
