Contusions
Moving parts in the machine can cause jams. Do not operate inside the
machine while the printer is running.
Warning
3D printing thermoplastics may result in the release of
e particles (UFPs) and
volatile organic compounds (VOCs) depending on the thermoplastic used and settings
of the 3D printer.
03
Safety and compliance
Hot Surface
There is a potential risk of burns: the print core of the printer can reach
temperatures above 200 °C, while the heated bed can reach temper -
atures above 100 °C. Do not touch either of these parts with your bare
hands.
Electrical Hazard
There is a potential risk of electrical shock in the machine, disconnect
all power sources before servicing.
To Next Page
Loading...
