08
Maintenance
08.4 Axis lubrication
To this procedure go to Utilities menu, select the option Axis Maintenance and then
follow the instructions on the screen. This instructions will guide you through all of the
To this step you will need to have machine oil and machine grease. We recommend
you to get a silicone oil and silicone grease.
08.5 Belt tensioning
Over time the belts may lose some tension. To adjust the tension, the operator must
unscrew the 3 screws that are holding each motor in place. Then pull the motor on op -
posite way of belt and tighten the screws again.
axis lubrification procedure.
To Next Page
Loading...
