Kilowatt Mode
The top row (Demand Row) on the screen shows how much electricity you
are currently consuming in kilowatts. In the example above, you are currently
using 5.2 kW of electricity.
The third row (Total Row) on the screen represents the Total Kilowatt-Hours
(kWh) of electricity consumed since the value was last reset. In the example
you gave used 36.9 kWh of electricity since the total was last reset.
To reset Total kWh value, refer Section 8.4 –
Resetting the Total Values.
6.4. Temperature Display
The PowerCost Monitor™ displays the temperature reading at the location of
the Sensor Unit. The temperature can be displayed in either °C or °F, as
shown in figure 6.5 below. To change the temperature reading between
Celsius and Fahrenheit, press and release the - °C/°F button on the back of the
Display Unit.
To Next Page
Loading...
Need help?
General