BlueLine PowerCost Monitor User Manual

7.4.
Rate A Threshold Rate B
Figure 7.3 Setting Electricity Rates
Resetting the Total Values
To reset the Total values (Dollars and kW) that appear on the Total Row (third
row) of the screen, press-and-hold the CLEAR button located on the top of the
device until you hear a beep. Only the Total values will be reset to 0, as shown
in figure 7.4, below. All other values will remain unchanged.

BlueLine PowerCost Monitor Specifications

General

Brand	BlueLine
Model	PowerCost Monitor
Category	Monitor
Language	English