JUST POWER ON44
6.3.2 Location Requirements
•
The EP800 should be installed ona firm, flat, level base.
• Do not install the system on flammable materials.
• Consider the weight and placement of components to ensure adequate structural
support.
Attention
Danger
If the battery pack is dropped, violently impacted or tilted during
installation, it may result in internal damage. So do not use such battery
packs to avoid safety risks such as battery leakage and electric shock.
Fig. 6-2
Water
Fire or
Flammable
Material
Max. 5
o
6.3.3 Space Requirement
Danger
Make sure to check for any cables or pipes before drilling into the wall.
To Next Page
Loading...
