JUST POWER ON46
Step 4: Fix 2 brackets #1 to two sides of B500 with 4 M5*10 screws. Put the bracket #2
through the compression rivet screw of bracket #1 and M8 expansion bolts. Secure
the connection with M8 and M5 nuts.
Step 5: Repeat Step3 and 4 to secure all battery packs.
Step 6: Follow the same steps to install the EP800 inverter on top.
Fig. 6-5
Ground
Wall
B500
Base
B500
EP800
55mm
2.15 in
40in
Door
Window
1 feet
Note: A set of EP800 energy storage system installation space needs to meet the
minimum 23.15m
3
.
To Next Page
Loading...
